Available in Nickel N2, N4, N6, and N8, the wire mesh can be woven in plain weave from 1 to 200 mesh, twill weave from 2 to 220 mesh, and Dutch weave up to 800 mesh. Weaving methods include plain, twill, plain Dutch, and twill Dutch. It is used in new energy power generation, petroleum, chemical, aerospace, and other industries.

Material | N2, N4, N6, N8. N2 and N4 are popular grades. |
Mesh | Mesh range: 1–2300 mesh. Plain weave: can be produced from 1 to 200 mesh. Twill weave: can be produced from 2 to 500 mesh. Dutch weave: can be produced up to 2300 mesh. |
Weave method | Plain/twill, plain dutch/twill dutch weave |
Characteristics | 1. Excellent acid and alkali resistance, corrosion resistance, heat resistance and wear resistance. 2. High electrical conductivity, thermal conductivity and ductility. |
Application | 1. Screening and filtration in acid and alkali environments. Used in mining, oil, chemical, food, pharmaceutical, machine and other industries. 2. Used in electronics and new energy power generation, aerospace and other industries. |

Individual rolls are packed in sealed plastic bags to ensure cleanliness and to minimize moisture pick-up. Rolls are packed in wooden boxes with suitable packing material to provide adequate protection against damage during handling and transportation. Each roll is labeled with the lot number, wire mesh size and quantity (square meters), and is accompanied by a chemical analysis report by XRF.

Pure Nickel Grade | Ni + Co | Cu | Si | Mn | C | Mg | S | Fe | Impurities |
| Min. | Max. | |||||||
N2 | 99.98 | .001 | .003 | .002 | .005 | .003 | .001 | .007 | .02 |
N4 | 99.9 | .015 | .03 | .002 | .01 | .01 | .001 | .04 | .1 |
N6 | 99.5 | .06 | .10 | .05 | .10 | .10 | .005 | .10 | .5 |
N8 | 99.0 | .15 | .15 | .20 | .20 | .10 | .015 | .30 | 1.0 |
Main Specifications of Nickel Wire Mesh (Special sizes can be custom made):
Mesh count | Wire diameter (mm) | Aperture (mm) | Max. width (m) |
10 | 0.60 | 1.94 | 1.60 |
20 | 0.40 | 0.87 | 1.60 |
30 | 0.30 | 0.55 | 1.60 |
40 | 0.23 | 0.40 | 1.60 |
50 | 0.20 | 0.31 | 1.60 |
60 | 0.15 | 0.27 | 1.60 |
70 | 0.12 | 0.24 | 1.60 |
80 | 0.13 | 0.19 | 1.60 |
90 | 0.12 | 0.16 | 1.60 |
100 | 0.10 | 0.15 | 1.60 |
120 | 0.09 | 0.12 | 1.60 |
150 | 0.063 | 0.11 | 1.60 |
180 | 0.053 | 0.01 | 1.60 |
200 | 0.053 | 0.07 | 1.60 |
250 | 0.040 | 0.063 | 1.60 |
300 | 0.040 | 0.044 | 1.60 |
325 | 0.035 | 0.043 | 1.60 |
350 | 0.030 | 0.042 | 1.60 |
400 | 0.030 | 0.033 | 1.60 |




